Many industrial sectors will be exposed to chemicals, chemical storage containers will be due to long-term use of drip, or because of damage occurred in the leak, or in the process of spilling spilled spatter, resulting in pollution of the working environment, affecting cleaner production. If the phenomenon of chemical leakage, did not get timely treatment or prevention, Poly Spill Pallets it will pollute the water or soil, not only has a bad impact on the environment, but also seriously endanger the people's lives and property safety. As the trap tray is a security product, its own quality and reliability is very important. Do not see the leak out of the "milk" and cry. First take preventive measures.
So when the enterprise choose to buy Sheng leakage tray, should be how to judge the quality of the trap trailer it? Zhongyu after years of industry experience, as we simply list a few points.
1. Take a look at this container. Is it professional? Is there a design, production, product development technology? Is there a professional certification report? EPA EPA and the US Leakage Prevention Act SPCC report is highly authoritative. It is unreliable to have any test and time test. Of course, on this point, we can rest assured that the public Yu Sheng leakage tray are their own design, production and sales.
2. Look at the strength of the product. Obviously, the thin, people step on the swing of the product is not easy to bear the pressure of four oil drums. Deformation occurs, cracking is inevitable. Some products in the summer temperature is relatively high, the strength can be, but to the winter, it is impossible, and the use of the material has a relationship, but also that his structural design, processing technology is unreasonable. Anti-leakage tray with thick side frame and the center load-bearing structure, durable.
3. Look at chemical resistance. Different materials are not chemically resistant. The design is unreasonable, the processing technology is unreasonable, will cause some stress concentration, the chemical will accelerate the expansion of the crack, the overall tile is not far away. Some of the tray, put some concentration of chemicals such as sulfuric acid, and soon corrosion cracking. Good pallets are not like that Public anti-leakage tray is made of polyethylene material, anti-ultraviolet, anti-rust anti-corrosion, can resist most of the chemicals.
4. Sheng leakage is a very important concept. Some manufacturers just look at their own is to do 2 barrels of trays or 4 barrels of the tray, the height and others almost, to copy the people's leaking, that is not vague In fact, because the product structure is not the same, the amount of leakage and he said a lot of difference, he said there is a lot of water! Look at the huge forklift inside the slot, and then look at people Sheng leakage slot is open, you know the amount of leakage is really not the same, although the size of the appearance are similar. Leakage tray to prevent and control smaller volume of leakage and drip, lower platform face, so that the chemical barrel closer to the ground, conducive to loading, access and packaging operations.
5. Look at the product design. A perfect design of the trap tray, you must follow the principle of oil drums placed, that is,SYSBEL Poly Spill Pallets Structure Specification a little inclined to place the oil drum, so as to avoid the oil drum is covered with water in the bucket. So a good siege tray should be around four corners than the middle part of the slightly higher, so to achieve this tiny tilt. You do not need to pad a piece of wood under the bucket. The leaking tray complies with the EPA 40 CFR 264.175 and the Leakage Prevention and Control Act (SPCC) specification and the US National Pollution Abuse Prevention System (NPDES), which governs the use and management of the Environmental Protection Act (EPA) Environmental Protection Act.
6. Grille to emphasize high, to non-slip, easy to replace. There are huge holes above that are insecure. The position of the grille should be fixed and can not slide in the tray. So the design of the tray to consider the location of the fixed grid. It is unsafe for the grille to slide freely in the tray slot. Two grills of their own responsibility, in their own scope of responsibility on the line. Leakage tray surface orange peel anti-skid grid full load does not occur when the split, grille removable, and handle the leaking liquid.
7. The location of the drain plug and the practice of the drain plug. The function of the drain plug is to drain the leaked liquid, preferably draining all the leaked liquid. If the location is not appropriate or because the internal structure of the tray is unreasonable, the drainage plug can not discharge all the liquid or can only discharge a limited liquid or do not drain, that is, drainage is not good! Please pay attention to the drainage location! The drain plug is part of the drain tray. The drain plug is considered to be added, and if the drain plug can not be realized and the tray is integrated, the drain plug is out of danger. The structure and production process of the drain plug are critical to the overall quality of the pallet.
8. Look at the color of the product. Yellow warning color, much better than black. Black tray, there may be used plastic back to the material (renewable material), strength and chemical resistance to reduce the quality of unreliable. Yellow products are difficult to add back to the material, otherwise there will be impurities on the surface, black spots. This also needs attention.
9. Do not simply compare prices, cost and service, brand is always the most important. Sheng leakage tray price itself is not high, can not be lost because of small.